Z160-1 Mattress Assembly Hot Melt Adhesive Application Case

• Application Product: Mattress fabric lamination
• Applicable Materials: Non-woven fabric, PK cotton, palm mat, sponge, latex
• Production Equipment: Manual glue spraying machine
• Operating Temperature: Approximately 175℃
• Glue Application Method: Manual spraying

1. When the tank temperature was set at 175℃, the adhesive melted without an obvious pungent odor and was fully melted within 30 minutes with stable melting efficiency.
2. The adhesive sprays smoothly with excellent fluidity. Featuring a long open time, it allows 30 seconds for position adjustment after spraying, perfectly matching the manual operation rhythm. It provides high bonding strength after curing without glue peeling or falling off during pulling tests.
3. The bonded parts fit tightly without hollow or abnormal sounds after compression, achieving a smooth and neat lamination effect.
4. A peeling test was conducted after two hours of placement at room temperature, and obvious material failure occurred at the bonding position, indicating excellent bonding fastness.

Z160-1 mattress assembly hot melt adhesive has strong compatibility with various mattress composite materials and is perfectly suitable for manual glue spraying working conditions. With a moderate melting temperature and low odor during melting, it creates a friendly working environment. Its long open time reserves sufficient adjustment time for manual operation and reduces assembly difficulty. Featuring balanced curing speed and outstanding bonding strength, the adhesive ensures tight lamination without abnormal noises and reaches the material failure standard after the peeling test. With stable overall performance and easy operability, it fully meets the manual assembly requirements for mattress fabric lamination and lining bonding, making it ideal for batch production in small and medium-sized mattress processing factories.